Model No:FM-2401
Francis Turbine is a reaction Turbine, which was developed by English born American Engineer Sir J.B. Francis. The water enters the turbine through the outer periphery of the runner in the radial direction and leaves the runner in axial direction and hence it is called a mixed flow turbine. As the water flows to the runner, a part of pressure energy goes on changing into kinetic energy. Thus the water through the runner is under pressure. The runner is completely enclosed in an air tight casing and the casing & runner is always full of water. The water is fed to the turbine by Means of centrifugal Pump. The runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. The circular window of the turbine casing is provided with a transparent. The runner assembly is supported by thick cast iron pedestal. Load is applied to the turbine with the help of brake arrangement so that the efficiency of the turbine can be calculated. A draught tube is fitted on the outlet of the turbine. Pressure vacuum Gauge fitted at the Inlet & Outlet of the turbine to measure supply head on turbine.
Francis Turbine is a reaction Turbine, which was developed by English born American Engineer Sir J.B. Francis. The water enters the turbine through the outer periphery of the runner in the radial direction and leaves the runner in axial direction and hence it is called a mixed flow turbine. As the water flows to the runner, a part of pressure energy goes on changing into kinetic energy. Thus the water through the runner is under pressure. The runner is completely enclosed in an air tight casing and the casing & runner is always full of water. The water is fed to the turbine by Means of centrifugal Pump. The runner is directly mounted on one end of a central SS shaft and other end is connected to a brake arrangement. The circular window of the turbine casing is provided with a transparent. The runner assembly is supported by thick cast iron pedestal. Load is applied to the turbine with the help of brake arrangement so that the efficiency of the turbine can be calculated. A draught tube is fitted on the outlet of the turbine. Pressure vacuum Gauge fitted at the Inlet & Outlet of the turbine to measure supply head on turbine.
Output Power : 1.33 HP / 1 Kw
Discharge : 1000 LPM (Approx.)
Supply Head : 10 m
Rope Brake : Dia 200 mm
Dynamometer
Sump Tank : Capacity 300 L.
Water Circulation : Capacity 5 HP
Centrifugal Pump, : Three Phase
Speed : 1500 RPM (approx.)
Runner : Having Curved Vanes Required: Water Supply & drain.
Discharge : Measurement with Pitot Tube with Manometer
Control Panel : Star/Delta Starter, Mains Indicator, MCB for overload protection
